Losing hot water is rarely dangerous on its own, but it is a sign worth reading carefully. A few checks tell you whether it is a simple reset or a job for a plumber.
Gas tank heaters
- Look through the sight glass near the bottom for the pilot flame. If it is out and your model allows it, relight following the label on the tank.
- If you smell gas, do not relight anything. Leave the house and call the gas utility from outside.
- A pilot that will not stay lit usually points to a failed thermocouple or flame sensor.
Electric tank heaters
- Check the breaker. If it has tripped, reset it once. If it trips again, leave it off.
- Some units have a red high-limit reset button behind the upper access panel. A heater that keeps tripping it has a thermostat or element problem.
Tankless units
Read the error code on the display and look it up in the manual. Common causes are a closed gas valve, a blocked air intake, or scale on the heat exchanger in hard-water areas.
Repair or replace?
A plumber tests elements, thermostats, gas valves and igniters, then flushes sediment that can bury a lower element or make a gas tank rumble. Tank heaters usually last about 8 to 12 years and tankless units around 20. If your tank is near the end of that range and the repair is a major part, replacement is often the better spend. In Java, SD, replacements generally need a permit and must meet current venting and safety-valve rules.
